If you have recently purchased a street sweeping machine and have acquired a bid through your town or city that allows you to clean the streets, then you are probably looking forward to your new career. You likely understand that your street sweeping machine is your best tool and investment. This means that regular maintenance is required to keep it in good condition. Keep reading to learn about a few tips to help keep your street sweeping machine in great shape.
Clean Your Brushes
Your street sweeper has a variety of brushes on the bottom and side of your machine. Gutter, rotary, wafer, and strip brushes are a few of the varieties that may sit on your machine. Most of these brushes will be made out of polypropylene materials. Polypropylene is a thermoplastic material that is commonly used to make products like ropes, carpeting, and other plastic materials. This type of plastic is quite strong. However, the thin polypropylene bristles of your sweeper brushes can break off over time.
One way to prevent this from happening is to wash your brushes after every use. A gentle car washing solution or dish soap will work best to clear away debris. Rinse with a hose afterwards. When your sweeper is not in use, you should also make sure that your device is placed in a garage or another covered area. While most chemical substances will not cause polypropylene materials to deteriorate, the heat and the UV rays of the sun can cause damage.
Some of your sweeper brushes may have some steel bristles. This is more common for gutter brushes. These brushes should be cleaned and rinsed just like the polypropylene varieties. However, you will also need to add some lubricant to the metal to keep corrosion at bay. Silicone based lubricants are not likely to last long when placed on the metal brushes, so think about using motor oil instead. Lubricate the bristles around once a week or after every cleaning. Also, inspect the brushes for corrosion since rust can transfer to the polypropylene bristles and to the road as well. When you lubricate the metal brushes, think about adding a grease lubricant to the bearings too, that help the brushes spin.
Clear The Sprayers
If your street sweeper is a variety that uses water to force debris and dirt off the street, then you will likely need to fill the back tank every week to make sure that you have enough fluids for cleaning purposes. Unfortunately, if the water in your area is hard, like it is in the vast majority of the United States, then calcium and magnesium may clog your water sprayers. This will reduce the volume and intensity of the water that you release when cleaning. To prevent issues, consider cleaning your water sprayers every three to six months. Most sprayers are the small and thin varieties that sit on the front of the sweeper, so place about two cups of vinegar in a small bucket with two cups of water. Allow each sprayer to sit in the mixture for two or three hours. Rinse the sprayers afterwards.
If possible, consider getting a water filter for your machine as well. These filters sit in or near the water pump and help to remove minerals and other foreign materials so they cannot clog the water spraying nozzles.
If you have a new street sweeper, then you will need to complete maintenance tasks so your machine is working at full capacity to clean the streets. This means cleaning the brushes and the water spraying mechanisms. You also may want to ask your local street sweeper parts supplier for other tips, products, and accessories that can keep your street sweeper in great shape. You can also contact a representative from a street sweeper service like USA Services of Florida for more information.