Whether you live in an old house or a new one, there are precautions you can take that may help you avoid plumbing problems in the future. While there are dozens of problems you can have with your plumbing system, one problem involves worn-out pipes. There are things you can do to control the wear and tear on your pipes, and taking these steps might help you avoid leaks and broken pipes. Here are three tips to help you reduce the amount of stress you place on the pipes in your house.
Reduce Your Water Pressure
The first way to prevent problems with your pipes is to make sure the water pressure in your system is set accurately. Water pressure in a house should never be over 80 pounds per square inch (psi). You can hire a plumber to test this for you, or you could purchase a gauge and test it yourself.
If you discover that your water pressure is above 80 psi, you should turn it down so that it is under this amount. If your water pressure cannot be manually adjusted, a plumber could install a pressure regulator on your water supply. This would allow you to control the pressure of your water.
High water pressure might be nice to have for your showers and faucets, but it is not so good for your pipes. High water pressure causes stress on your pipes in several ways, and the main way is that it makes your pipe joints work harder. When water moves through the pipes too quickly, it puts stress on all the pipes in the system.
If any of your pipes are close to being worn-out, the high pressure from the water could be enough to blow a hole in one of your pipes. This is why keeping your water pressure regulated is especially important in older homes.
Treat Your Water
The second way to prevent broken pipes and leaks is to treat your water. If you have hard water, you should consider getting some type of water treatment system for your home. Hard water contains a variety of different minerals. You may see these minerals in your sinks and tubs, because they often appear as stains.
The problem with hard water is that the minerals often get trapped inside the pipes as the water is transported to the faucets in your home. As the minerals get trapped, they can cause your pipes to close up. This leads to a restriction of water flow, and it can also cause to premature corrosion of the pipes in your system.
There are a variety of different types of water treatment systems you can purchase, including:
- Whole house water filtration systems
- Water softeners
- Reverse osmosis systems
You can talk to a plumber to find out which type would be best for you home.
Monitor What Goes In Your Pipes
The final way to protect your pipes against leaks and damage is by monitoring what goes into them. By doing this, you can protect all the drain pipes in your house, which may help extend their life. Here are a few tips to follow:
- Never pour things down your drains that do not belong in drains – This includes any type of cooking grease, paint, or household chemicals.
- Stop hair from entering drains – Place screens over all the drains in your house. Drain screens will stop most debris from entering drains, but you will have to clean them out from time to time.
- Pour hot water down your drains once a month – Every month you can clean your drains by pouring a kettle full of boiling hot water down them. This will help break up grease and trapped debris in your lines.
Preventing plumbing problems is the best route to take, but this may not stop all problems with a plumbing system. If you encounter a problem and need help fixing it, you could always click for more information or look for a reputable plumber to hire.